Keri Systems

Keri Innovates Continuously with Enhancements and New Products to Keep You Ahead

Doors.NET™


Access Control Software for NXT IP-Based Hardware designed for today’s IT environments

Doors.NET™ is Keri’s newest access control software application, designed to manage the NXT TCP/IP-based hardware platform. It was designed natively in Microsoft’s .NET platform and utilizes their SQL database engine with all instructions and communication with the database done through Stored Procedures, making responses lightning quick.

Click to learn more about Doors.NET™

Doors v4.7

Doors v4.73 implements the following changes:

  1. For PXL controllers configured for two-door operation, auto-configuration now properly detects if the second door is configured for gate operation or elevator control.
  2. A new feature has been added to provide improved, more convenient operability in mixed PXL/Entraguard networks. When enabled and when operating in modem mode, this feature will automatically disconnect the modem from the PC following any communication command made by Doors to the master controller, freeing the telephone line for immediate use by the Entraguard system. In previous operation, certain Doors commands required the operator to manually disconnect the modem and certain Entraguard commands would have the modem waiting for a timeout to expire before freeing the telephone line. This feature is enabled via a new check box in the System Setup > System Options > Network Master Parameters menu field in Doors.
  3. The Cardholder Export/Import program has been modified to include export fields for the following credential values:
  • enrollment date/time
  • void date/time
  • activate date/time
  • expiration date/time

NOTE: The Export/Import program will not import values for the above listed fields.

To view all items in detail, please refer to:
Adobe Acrobat (PDF) file formatDoors_Software_Release_Notes_v4_73

Or click here for more information on Doors.
Back to the Top

PXL-500 Firmware v8.5.19

This firmware release corrects four issues.

  1. Corrected PXL-500 interoperability with an SB-G satellite board. SB-G behavior is limited to second door control.
  2. Corrected PXL-500-LC interoperability with an SB-G satellite board and an SB-593 satellite board. SB-G behavior is limited to second door control. SB-593 behavior is jumper-selectable between second door control or general I/O.
  3. Corrected PXL-510-LC interoperability with an SB-G satellite board. SB-G behavior is limited to second door control.
  4. Corrected PXL-500-G interoperability with an SB-593. SB-593 behavior is jumper-selectable between second door control or general I/O.
Click Here for more information on the PXL-500 controller.
Back to the Top

Entraguard Firmware
New Entraguard Platinum Firmware v9.1.06 - Firmware Release Notes


New Entraguard Titanium/Silver Firmware v7.6.05 - Firmware Release Notes

Click Here for more information on Entraguard Telephone Entry Systems.
Back to the Top

Connector Tolerance
Keri has switched to a new connector vendor for our PXL and EntraGuard controllers. The new connector has a better interlocking mechanism between connector plug and socket, providing a more secure connection.


Keri extensively tested the interconnectivity of the two vendors and found no issues. However if both connectors are at the far end of their tolerances it appears that the mechanical connection between the two vendors can be affected. Because of this, Keri strongly recommends you do not mix the two connector types in an installation.

All PXL and EntraGuard controllers are shipped with an installation kit that has all the correct connectors necessary for that controller. If you are replacing an existing controller with a new controller in an installation, please replace the connectors on the existing wiring with the connectors provided with the new controller. This will eliminate the tolerance issue between connector manufacturers and ensure good seating between connector plug and socket.

The Connector Tolerance document provides information on how to distinguish old manufacturer from new manufacturer connectors.

Adobe Acrobat (PDF) file formatConnector Tolerance Note | 218 Kb | 00 min   32 sec ( download time for 56K dial-up)
Back to the Top


Doors v4.73 implements the following changes:
1. For PXL controllers configured for two-door operation, auto-configuration now properly detects
if the second door is configured for gate operation or elevator control.
2. A new feature has been added to provide improved, more convenient operability in mixed PXL/
Entraguard networks. When enabled and when operating in modem mode, this feature will
automatically disconnect the modem from the PC following any communication command made
by Doors to the master controller, freeing the telephone line for immediate use by the Entraguard
system. In previous operation, certain Doors commands required the operator to manually
disconnect the modem and certain Entraguard commands would have the modem waiting for a
timeout to expire before freeing the telephone line. This feature is enabled via a new check box in
the System Setup > System Options > Network Master Parameters menu field in Doors.
3. The Cardholder Export/Import program has been modified to include export fields for the
following credential values:
- enrollment date/time
- void date/time
- activate date/time
- expiration date/time
NOTE: The Export/Import program will not import values for the above listed fields.